1. Shut down according to the prescribed process: when shutting down DTF Printer, first turn off the control software, and then turn off the main power switch, to ensure that the trolley returns to the normal position, and to ensure that the print head and ink pile are completely closed to avoid clogging the print head.

2. When replacing the nozzle of DTF printer, it is recommended to use the original genuine nozzle, and do not use the nozzle whose source is unknown or whose price is significantly lower than the market price. If the device is not used for more than three days, please do a good job of moisturizing the nozzle to prevent drying and clogging.

3. It is recommended that you use the original ink, and it is strictly forbidden to mix the ink of two different brands, so as to avoid chemical reaction, block the nozzle and affect the picture quality.

4. Do not plug and unplug the USB printing cable with power, so as not to damage the mainboard.

5. If the machine is a high-speed printer, be sure to connect the ground wire: 1. When the air is dry, the static electricity problem cannot be ignored.2. When some low-quality materials with strong static electricity are used, static electricity may be generated, which may damage the safety of machine electronic components and print heads, and static electricity may also cause ink flying during the printing process. print. Do not operate the print head with power on.

6. DTF Printer is a precision printing equipment, it is recommended to be equipped with a brand voltage stabilizer with a power of about 2000W.

7. The ambient temperature is kept at 15C-30C, the humidity is 40%-55%, keep the working environment clean and avoid dust.

8. Scraper: Regularly clean the ink pile scraper to prevent ink solidification from causing damage to the print head. Note: In the white ink heat transfer printer, do not wipe in one direction. The correct method is to wipe from the middle, wipe the white part from the middle point down, and wipe the color part from the center point upward, so that the color and white do not mix with ink.

9. Working platform of DTF Printer: Keep the working platform free of dust, ink and debris to prevent scratches on the print head. Clean the sanitation of the ink cup aprons once a week.

10. Ink cartridge: Cover the cover immediately after filling the ink to prevent dust from entering.

Zhengzhou Visual-Tex (https://www.visual-tex.com) used advanced and practical technology to design and produce A3 DTF Printer, Visual-Tex DTF Printer, DTF PET Film Printer, DTF Printing Machine and other mature products, which are well known in the national photo machine industry. the products are exported to Europe, America, South America, Southeast Asia, the middle east and Africa, and in many countries and regions around the world to establish a distribution network and service system.